Prepare for go-live - Finance & Operations | Dynamics 365 (2023)

  • Article
  • 8 minutes to read

This article provides guidance about how to prepare for the go-live for finance and operations apps.

To ensure that the production environment is used for live operations, Microsoft provisions the production instance when the solution is ready and after project readiness has been validated as part of the Go-live Readiness Review with Microsoft. For more information about the environments in your subscription, see the Licensing guide.


Most projects are required to use the FastTrack for Dynamics 365 implementation portal for their Go-live Readiness Review with Microsoft.

For answers to common questions about go-live, see the Go-live FAQ.

The following table lists the key steps in the go-live process.

(Video) Dynamics 365 for Finance and Operations Go live Planning Tech Talk

Validation of prerequisitesA project is close to the end of the testing phase, and you're planning the go-live review.Customer/PartnerFor more information, see the Go-live Readiness Review prerequisites section.
Go-live Readiness Review with MicrosoftNo later than four weeks before the go-liveCustomer/Partner submits answers to review questions in the FastTrack for Dynamics 365 implementation portal. Microsoft FastTrack provides a review report.For more information, see the Go-live Readiness Review with Microsoft section.
Go-live review workshop with Microsoft (only for eligible projects)The workshop is part of the Go-live Readiness Review.Microsoft FastTrack together with the project teamThis step applies only to eligible projects that have FastTrack engagement. For more information about the workshop, see Go-live Readiness workshops.
Production deploymentProduction deployment can be initiated as soon as the Go-live Readiness Review is completed. After deployment is triggered, production deployment takes approximately 30 minutes.Customer/Partner triggers the deployment in Microsoft Dynamics Lifecycle Services (LCS).After the go-live review is successfully completed, the Configure button is enabled for the production environment. Selection of this button triggers the production deployment.
Deployable package installationAn average of 30 minutesCustomer/PartnerFollow the instructions in Promote an update to production environments. The packages must contain all the models and binaries consolidated into all-in-one deployable packages.
Data migration to productionThe duration/time depends on the method that is used.Customer/Partner
Cutover activitiesThe duration/time depends on the project.Customer/Partner

Go-live Readiness Review prerequisites

The project team should validate solution readiness. The following prerequisites must be met before the Go-live Readiness Review with Microsoft can be initiated. The production environment can be deployed after the Go-live Readiness Review with Microsoft has been successfully completed.

  • User acceptance testing (UAT) and performance testing have been completed or almost completed in a Tier-2 (or higher) environment. Tier-1 environments must not be used for UAT or performance testing. For more information, see Tier-1 vs. Tier-2 and higher. For information about how to identify the correct sandbox environment tier, based on your transaction volumes, see Selecting the correct Tier-2 or higher environment.

    During the UAT phase, test all the business processes that you've implemented and any customizations that you've made.

    • Test cases should cover the entire scope of requirements.
    • Use migrated data for testing. This data should include master data and opening balances, even if they aren't yet final.
    • Use the correct security roles for testing, including default roles and custom roles that are assigned to users.
    • Make sure that the solution complies with any company-specific and industry-specific regulatory requirements.
    • Obtain sign-off from the customer.

    Performance testing is a crucial part of validating the readiness of your solution. For detailed guidance about the recommended practices, review the Performance Testing Techtalks.

  • The environment version that is planned for the go-live complies with the Software lifecycle policy. If you use Commerce Scale Units (CSU), the CSU version must be in sync with the environment version. For more information, see Component dependencies.

  • Key customer team members have been added to the LCS project.

  • A generic service account that will be used to deploy the production environment has been added to LCS.

  • All licenses that are required for go-live have been purchased in the correct tenant.

  • After all licenses have been purchased, the final subscription estimator has been uploaded and activated in LCS. For more information, see Subscription estimator in Lifecycle Services (LCS).

    (Video) Dynamics 365 Cutover and Remote Go Live Strategy

  • The Customization analysis report (CAR) has been run, and critical issues have been addressed. For more information, see Customization Analysis Report (CAR).

  • The go-live date in LCS correctly represents the go-live date that you're targeting. This date is the date when end users will start live operations, not cutover activities.

  • All relevant tasks and phases in the LCS methodology have been completed. Production can be deployed only after all phases, including the Test phase, have been completed. To complete a phase in LCS, first complete every required step in that phase. When all the steps in a phase have been completed, you can complete the whole phase. You can always reopen a phase later if you must make changes. The process of completing a step has two parts:

    • Do the actual work, such as a fit-gap analysis or UAT.
    • Mark the corresponding step in the LCS methodology as you complete it.

    Complete the steps in the methodology as you make progress with the implementation. Don't wait until the last minute.

Go-live Readiness Review with Microsoft

All finance and operations apps customers must complete a Go-live Readiness Review with the Microsoft FastTrack for Dynamics 365 team before production environments can be deployed. The main purpose of the review is to assess project readiness and help you have a smooth and successful go-live experience. LCS project users will receive an email reminder about the Go-live Readiness Review, based on the go-live date in LCS.

The review might require up to three business days for the initial report, plus additional time for any risk mitigation that is required. Determine an appropriate time to start this review, so that you can meet the go-live timeline.

For most projects, the Go-live Readiness Review is done in the FastTrack for Dynamics 365 implementation portal.


(Video) Microsoft Dynamics Finance & Operations LCS BASICS

There are only two exceptions that will not use the FastTrack for Dynamics 365 implementation portal:

  • Projects that are in United States (US) Government Community Cloud (GCC). Please download the Go-live checklist, fill in all necessary details, and send it via email to Always include a key stakeholder from the customer and the implementation partner on the email. Microsoft FastTrack will review the project and follow up.
  • For projects that are already live, but planning to move the live solution to a new tenant if the solution is not changing, completing a new Go-live Readiness review is not necessary. Please follow the steps described in Move your production environment to the new tenant to get the production slot enabled on the new tenant.

Initiate the Go-live Readiness Review in the Portal

  1. The customer/partner sends an e-mail to and includes the following information:

    • Confirmation that the project is ready to start the Go-live Readiness Review
    • Confirmation of the LCS project ID
    • Confirmation of the users from the LCS project who will participate in the Go-live Readiness Review and should be granted access to the portal for the Go-live Readiness Review process


    Key stakeholders from the customer organization who are participating in the review must be selected as Review participants in the portal.

  2. Microsoft grants portal access to the requested LCS project users and confirms that this task has been completed by responding to the email.

  3. The customer/partner starts the review in the portal by following the guidance in the Portal Help article. All users who have access to the portal can access this article.

Submit the review

  • The project team should provide answers to all questions in the review. The review process in the portal supports multi-user scenarios. Multiple team members can provide details for the go-live review at the same time.
  • When answers have been provided to all the questions in the Go-live Readiness Review, submit the review to Microsoft by selecting Submit.

After the review is submitted in the portal

  • Microsoft FastTrack reviews the project and provides a report that describes the potential risks, best practices, and recommendations for a successful go-live of the project. The review might require up to three business days for the initial report, plus additional time for any risk mitigation that is required.
  • Users who have been selected as Review participants in the portal receive email communication that provides updates about the review.
  • When all critical risks have been addressed, and the review has been completed, Microsoft enables the production environment slot in the LCS project. The customer/partner can then trigger the production environment deployment.


(Video) 01. Dynamics 365 Finance & Operations Module

If you encounter any issue with the portal, contact the portal Support team by selecting Contact us in the upper-right corner of the portal or sending an email to In the email, specify the ID of your project in LCS, and provide details that describe the issue.

Production environment deployment


The production environment must be used exclusively to run your business operations. Don't use it for testing, demo, or training purposes. You will be able to do the cutover, and mock the cutover (if a mock cutover is planned), in production. To test the solution, use an appropriate sandbox environment that has been designed so that it includes all the elements and services that are required for testing.

We recommend that you select a service account for environment deployment. For example, select a generic user account as the admin user of the environments that you deploy. If you select a named user account, you might not be able to access an environment if that user is unavailable. Here are some examples of scenarios where the admin user must access an environment:

  • First sign-in to any environment after initial deployment – The admin user is the only user who can access the environment.
  • First sign-in to a sandbox environment after a database refresh from the production environment – No user accounts except the admin account can sign in.

The production environment should be deployed to the same datacenter where your sandbox environments are deployed, and where UAT and performance testing were done. For information about network requirements and how to do latency testing, see Network requirements.

Production deployment takes approximately 30 minutes. When deployment has been completed, an email notification is sent to the environment administrator.

The production environment is sized based on the number of licenses that have been allocated to the LCS project and the transaction volumes in the Subscription estimator.

After production has been deployed, the project team can apply the deployable package by following the instructions in Promote an update to production environments and then migrate the data. For data migration, we recommend that you prepare and validate data in a non-production environment and then copy the sandbox database to production.

(Video) Implementation methodology in Microsoft D365 finances and operations(End to End process)తెలుగులో


1. Dynamics 365 FastTrack for Dynamics Go Live Readiness Microsoft Dynamics
(Microsoft Tutorials & Training)
2. MB-300 : Module 14 Prepare for Go-Live
(GTech Learn)
3. Dynamics 365 Finance & Operations - Onboarding
(Michael Cobbin - Dynamics 365)
4. Test Strategy for Dynamics 365 Finance & Operations
(MS Dynamics 365 & Power Platform)
5. Microsoft D365 Finance & Operations Technical Training | QBS INFOTECH
6. FastTrack and Success By Design For Dummies - Finance & Operations
(DynamicsCon hosted by Dynamics User Group)
Top Articles
Latest Posts
Article information

Author: Msgr. Refugio Daniel

Last Updated: 01/23/2023

Views: 5729

Rating: 4.3 / 5 (54 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Msgr. Refugio Daniel

Birthday: 1999-09-15

Address: 8416 Beatty Center, Derekfort, VA 72092-0500

Phone: +6838967160603

Job: Mining Executive

Hobby: Woodworking, Knitting, Fishing, Coffee roasting, Kayaking, Horseback riding, Kite flying

Introduction: My name is Msgr. Refugio Daniel, I am a fine, precious, encouraging, calm, glamorous, vivacious, friendly person who loves writing and wants to share my knowledge and understanding with you.